Clone A Willy Review: My Results, Tips & Experience

The Clone-A-Willy kit is an amazing pack that will help in making a replica of a penis. This kit stands out as it tries to ace the accuracy in peen-cloning devices. It comes in a variety of colors, is customizable, and retails at a very affordable price.

The Good | Clone-A-Willy is a great unit that helps you get an exact duplicate of your penis. It’s unique and if done right, gets the most accurate details than other models. There are a variety of colors that you can pick from including 2 glow-in-the-dark options. It’s customizable and comes at a cheap price.

The Bad | It may take a lot of trials before you get the whole process right. Also, the initial lumps found in the casting mixture may interfere with the shape and create bumps. And sustaining an ‘unmotivated’ erection for the cast may become quite a challenge.

The Bottom Line | The Clone-A-Willy kit gives an awesome way to produce a penis replica. The resulting duplicate could be used as a dildo or as a gift to a partner. It also offers a variety of customizing options and sells at an affordable price.

Empire Labs did many a huge favor when they developed the Clone-A-Willy kit.

Of all the good things it can do… Men are now able to make a copy of that one part of us and leave it with our loved ones. – Or just shelve it as a trophy 🙂

But wait, what’s a Clone-a-Willy kit again?!

Well… Clone-A-Willy is an ingenious kit that’s used to help people make a replica of a penis. The resulting product doubles up as an effective dildo.

And the best thing is that you can pick from a numerous selection of colors and skin tones available.

These include a green and pink option that can glow in the dark… A great Halloween gift if you ask me.

So, how does this all work? Read on to find out more about Clone-A-Willy instructions, use, and tips…

Clone A Willy Review: Tech and Specs Overview


Size is a very important factor when it comes to selecting any form of penetrative toy. And getting the right size for yourself (or partner) is the most important bit. 

And for this reason, Empire Labs made sure that the Clone-A-Willy kits can imitate different sizes. 

The standard-size issue at the current time is 11.00” long and 2.5” wide.

If you don’t have a partner… The info in the section below may help you get the right size.


A majority of the Clone-A-Willy pleasure products are made using medical-grade silicone. The silicone is that is free of phthalates and latex compounds.

The silicone material is also flexible, light, and offers the best skin-like sensations. And on top of that, cleaning it is a simple walk in the park.

The other constituent is the molding powder. This compound comes with every kit sold by the company. It is mostly made out of algae extract derived from seaweeds, therefore, cutting back on the number of processed chemicals used. 

The other bit is the molding gel. This is the liquid compound also coming with the standard Clone-A-Willy kit.

Its work is to capture the details present on your peens like the veins, shape, and the crown.

Price, Where To Buy

The Clone-A-Willy retails at a very cheap price in most stores.

If you’re thinking of getting your own Clone-A-Willy kit, pass by at Lovehoney’s online store.

They have a diverse selection of kits for you to pick from. This includes the glow-in-the-dark and vibrator options.

Also, you could check out the removable Clone-A-Willy cock ring ($8.99) sold on the site. This accessory is handy in helping you keep your hard-on during the molding process.

Worth mentioning… Lovehoney offers free deliveries to all orders above $60 plus a 1-year warranty. 

STAY AWAY from stores like Amazon or eBay when making this kind of order. The sellers there are notoriously known for shipping counterfeits made from unknown materials.

These could cause harm if used on a human body and they never come with a warranty!

Comparison Table:

Take a look at this table showing the model specs of the available Clone-A-Willy kits.

How To Use Clone A Willy Kit?

Ensure you’ve read the Clone-A-Willy instructions before starting. Also, ensure that you have the following items before you set the ball rolling:

  • Razorblade/Scissors
  • Cardboard
  • Huge mixing bowl
  • Marker pen
  • Timing device (your smartphone would do)
  • A big mixing spoon (metal)
  • Disposable cup

Step 1:

Measure your erect peen against the clear tubing and add ½ inches above its actual length.

Mark that length with the marker pen then cut it… Taping the edges to prevent it from nipping your penis.

Then using 1 ¾ cups of water, add the molding powder into the bowl and stir continuously to mix. After 2 minutes, pour it into the tube. 

It may have some lumps in it but that’s normal. 

Step 2:

Stick your hard penis inside the mixture and let it sit for 3 mins and pull out as it dries. Ensure you have a cleaning rug placed below to collect any spillages.

Once you’ve withdrawn your peen, let the mold dry for about 3 – 6 hours before moving to the next step.

Step 3:

Mix and stir well the liquid silicone plus the molding gel in the disposable cup. When finished, pour that solution into the dried-up mold using the spoon to scrape every drop of it.


Pierce the middle of the cardboard and insert the vibrator through it, leaving about 1.00” hanging out. Immerse it into the solution and leave the vibrator base and cardboard resting outside.

Then, let it sit there for a minimum of 24 hours. before taking it out of the cast.

Step 4:

After the time has elapsed… Pull the now-dried silicone mold out of the tube and cut out the dried cast. You may use the scissors to cut off any flaps hanging around the edge of the base.

This should leave you with your own neat and fully-formed clone of your willy.

My Results, Tips & Experience

So what did I learn from the whole Clone-A-Willy process?

Well, I gotta say that it’s a great achievement to look at a product of your own making. Initially, I had doubts about whether I’d pull it off at the end of it all. 

But again, it all boils down to how good you are at following instructions. And it’s also important for me to mention that you need more of a sexy than ‘science’ mood here.

This is mostly true if you want to initiate and maintain a boner – a key ingredient.

From what I gathered in my experience:

If you are larger than the 9.00” mark, then consider buying a separate XXL 7” vibrator. That is more fitting to deliver enough vibrations to ripple through the added silicone mass.

Again, a 9”+ penis length means that you ought to weigh getting an extra silicone solution. The same also applies when you want to make a non-vibrating impression.

And to add more tips…

You may use a cock ring to help you sustain an erection. 

But if you have a partner, you could try making out passionately to help keep you hard. You can also opt to go for a good blowing session and you will achieve the same results. 

On the other hand…

If you don’t have a partner, you could try using a vibrating butt plug to help keep you aroused. Other means that you could use when solo are watching or listening to some porn.

And on getting the mold’s size right…

If you don’t have a partner, you can use any of your favorite dildos lying around to make measurements.

This will help you get the right estimate of the shaft length that your orifice(s) can accommodate. 

And finally… If your finished mold ends up having bumps on the shaft’s length, use it with a condom.

This is because there’s a likelihood of pores being present on the dildo. And that is bad as they can retain a lot of muck and cause bacterial infections when used ‘raw’.

Would I Recommend It? If so, to whom?

I would recommend the Clone-A-Willy to guys who are looking forward to making a DIY dildo.

The quality medical-grade silicone used is a great touch of class and takes out risks of allergic body reactions.

And to add to this party… There is a 9-color option available that you could select from all coming in the standard size. 


Who Is It For?

  • If you want to make a quick DIY dildo.
  • If you are looking for a high-quality silicone cloning kit.
  • If you want an affordable DIY cloning kit.
  • If you prefer cloning kits that accommodate vibrating bullets.

Who Is It Not For?

  • Guys who may lack the patience to try until they get the process right.
  • Guys who struggle to hold an erection even with the help of a cock ring.
  • If you’re after a “perfect” penis replica.

What Do Other People Think About It?

From Reddit:

“The good: it works as advertised. The vibrator it comes with for insertion into the mold is pretty cheap but it’ll make a solid mold. A fun thing to have around the bedroom.

The bad: if you mix it and get air bubbles into the batter (hard not to) you end up with a porous material that will definitely harbor germs (our solution is to just use it with a condom on it).

My suggestions are:

To avoid losing the erection don’t get hard and go straight to making the mold – get him hard, fuck for a while, do something you know he looooooves, and then after a good while make the mold using your organized and ready-to-go mix. Be quick about it! ? It does only take I think 2 minutes of staying hard to make the mold.

Use the mold to make the dong soon after or it will dry out, enlarge the void, and be much larger than he is. (Maybe this something you actually want to do lol!) Ours was left out for 18 hrs or so and “my” cock seems to be dwarfed by the mold in girth.

Also, if he is larger than 6″ or curved get the “big boys” kit, or whatever they call it.”


“A few pieces of advice: READ THE INSTRUCTIONS BEFORE YOU GET SEXY. I didn’t realize there were so many steps when we started in terms of having things ready.

Cutting and taping the tube was a big one. Getting water of exactly the right temperature is another.

After getting sexy: make sure you have a way to maintain his erection. Blow him right before mixing, or if you have my bf, stick a vibrator up his ass. Make out vigorously while his dick is in the polymer sludge.

When applying the casting goo: There is no good way to do this without getting some of it everywhere. Literally, the only good way to do this would be to have him planking with his penis straight down, but that’s dumb. We opted for standing. 

Do this on a towel, preferably an old, disposable towel because this stuff is never coming out of my carpet. And you have to just go for it and really just push it against your skin so it doesn’t leak more than that. 

And did I mention it gets in your pubic hair? At least, it washes/pulls out of that pretty easily.

All this accounted for, I have been VERY satisfied with my new replica penis. It even comes with a vibrator! It was super worth it and cheaper than some dildos.”


Conclusion: Final Thoughts

The Clone-A-Willy kit offers a great way to make a clone of your willy. The good thing is that they come in multiple colors and top-quality platinum-cure silicone.

Again, getting the molding process right may need lots of attention and extra care to hack it. 

So simply put, it’s a cloning kit worth checking out and the best thing is that it retails cheap.

I hope this Clone-A-Willy review was a great help to you.

Did you enjoy reading this article? Feel free to share and leave any questions in the Comments Section below.


Clone A Willy Review

Dainis Graveris

Clone A Willy


Overall the Clone-A-Willy kit is a fun experience and creates a quality product for men who want to clone their willy. The high platinum-cure silicone is a great factor.

Dainis Graveris

Dainis Graveris

With over 2 year experience working in a local adult toy store Dainis has gathered quite a bit of experience about helping people find the best for their needs. He's also a top writer on Quora (7M views, 2.3K followers) and has written over 70+ guides on SexualAlpha. Read More

Got Questions? Ping me on Twitter.